Projects
Projects Funded by the Technology Agency of the Czech Republic
TQ15000300 – Flexible side emitting lightguides, 2025-2026, Ing. Josef Osička, Ph.D.
TQ15000001 – Gas permeability and tightness in FFF rapid prototyping, 2025-2026, Ing. Jakub Ševčík, Ph.D.
TQ15000379 – Carbon nanodots as functional and marking fillers for polymer systems, 2025-2026, Pricilla Rajendran Blessy, Ph.D.
TQ05000002 – Fully Bio-based Advanced Filtration Systems for Removal of Emerging Pollutants from Water BAPUR, 2024-2027
prof. Ing. Vladimír Sedlařík, Ph.D.
FW10010547 – Procession of plastic recyclates towards vacuum shaped products, 2024-2025
prof. Ing. Vladimír Sedlařík, Ph.D.
FW10010207 – Intelligent thermotropic coatings for thermal management of buildings (cooperation s Rokospol a.s.), 2024-2026
Ing. Michal Machovský, Ph.D.
TQ03000235 – Project Sigma – Research and optimization of the processing properties of polymer recycles for their reuse in textile applications -2024-2025
Ing. Martina Pummerová, Ph.D.
TK05020019 – “Development of LiFePO4 rechargeable batteries for stationary applications” – 2023-2025
prof. Ing. Petr Sáha, CSc., dr. h. c.
TK05020036 – “Halogen-free safety electrical cables meeting the requirements of LOCA of the latest types of nuclear power plants and the latest requirements for fire safety according to European and national legislation (CPR EU/305/2011, EN 50575, CSN 73 0895)” – 2023-2025
prof. Ing. Tomáš Sedláček, Ph.D.
SS06020282 – “Ecological recycling of biopolymers” – 2023-2025
prof. Ing. Vladimír Sedlařík, Ph.D.
TH80020008 – Modelling Wear of Intrinsically Self-Healing Elastomers for Reduced Particle Emission and Improved Lifetime Performance in Future e-Mobility Concepts – 2022-2025
Assoc. prof. Dr.Ing. Radek Stoček
TK03030157 – Next generation all-solid-state Li-ion batteries – 2020-2025
Prof. Ing. Petr Sáha, CSc., dr. h. c.
TN0200051 – National Centre of Competence – Polymer Materials and Technologies for the 21st Century (2023-2028)
Prof. Ing. Vladimír Sedlařík, Ph.D.
FW06010191 – Research and development of solar reflexive coating system for enhancing the energy performance of buildings – 2023-2025
Ing. Milan Masař, Ph.D.
FW06010324 – Reduction of the carbon footprint of non-woven fabric especially for disposable hygienic and medical applications – 2023-2026
prof. Ing. Tomáš Sedláček, Ph.D.
FW06010527 – A new generation of nanostructured pleated filters for collective and personal protection of the population – 2023-2025
Dr.Ing. Miroslava Kovářová
Completed projects
FW01010327 – Advanced polymer and composite materials for additive manufacturing – 2020-2024
FW03010006 – Permanent protection of touch screens to prevent the deposition of organic pollutants on their surface – 2021-2024
FW01010620 – Research and development of materials and technology of small batch production of structural and sealing elements – 2020-2023
TH71020005 – Bioactive injectable hydrogels for soft tissue regeneration after reconstructive maxillofacial surgeries – 2020-2023
TH71020006 – Li-ion Battery-Supercapacitor Hybrid Device – 2020-2023
FW01010588 – Filters for removal of biologically active molecules from the drinking water – 2020-2022
TH02020836 – Development of novel environmentally friendly packaging with added value for food applications – 2017-2020
TH03020117 – Conductive materials and their application for antistatic and dissipative treatment of the paper and polymeric products – 2018–2021
TH04020466 – Longfiber composites for serial production – 2019-2022
TJ02000269 – Nanostructured filtration materials for elimination of arsenic in water – 2019-2021
TP01010006 – Commercialization at the Tomas Bata University in Zlín II – 2020-2022
- subproject “Innovative design of micro-fiber optic cable protectors” – 2020-2021
- subproject “The technology of plastic recyclates processing with mineral fillers for composites preparation”, 2020-2021
- subproject “Novel biodegradable composition based on degradable polymer and material with natural origin”, 2020-2021
- subproject “Verification of the technical concept of a test equipment for accelerated analysis of rubber aging” – 2021-2022
- subproject “Recycling of biodegradable waste by processing for cultivation applications”, 2021-2022
- subproject “Antimicrobial footwear materials”, 2020-2021
Projects Funded by the Ministry of Agriculture
QK1910392 – Environmentally friendly soil conservation materials for the crop production intensification based on renewable resource – 2019-2023
Projects of Ministry of Industry and Trade
CZ.01.01.01/01/22_002/0000682 Development of a new ecological anti-noise barriers – 2024 – 2026 – doc. Dr. Ing. Radek Stoček
The physical implementation of the project CZ.01.01.01/01/22_002/0000682 „Development of a new ecological anti-noise barriers“ has begun.
The aim of the submitted project is to acquire new knowledge needed for the development of new products through the implementation of industrial research and experimental development. The results of the activities of business entities in cooperation with R&D capacities will lead to the introduction of innovations of these higher orders and to the creation of products competitive on world markets.
The output of the project will be a prototype of ecological anti-noise barriers that can be produced from recycled material, the basis of which will be rubber granules from tires.
Financial support from the EU is provided for the operation.
CZ.01.01.01/01/22_002/0000413 – Research and development of a drinking water filtration unit – 2023-2026 – Dr. Ing. Miroslava Kovářová
The aim of the project is to make quality drinking water available to the widest possible group of the population and generally to achieve effective drinking water management while simultaneously taking a gentle approach to other components of the environment and supporting sustainable development.
Financial support from the EU is provided for the operation.
Completed projects
FV10756 – Development of polymer carriers in sub-micro and nano-forms – 2016-2020
FV30048 – New additives for multifunctional modification of polymeric surfaces – 2018-2021
FV30337 – Bioactive glass matrices for effective water hygienization – 2018-2020
FV40377– Research and development of a biocompatible material for controlled drug release and transport into the cornea – 2019-2022
FV20088 – Development of novel formulations for modification of asphalt mixtures using recycled polyvinylbutyral (cooperation with SKLOPAN Liberec, a.s.) – 2017-2019
FR-TI3/424 – Electroluminescence foil for escape route lighting (cooperation with NWT, a.s.) – 2011-2014
European Regional Development Fund – OP EIC
Completed projects
CZ.01.1.02/0.0/0.0/20_321/0024533 – Design potted LED luminaire with a homogeneous radiating surface (cooperation with Lamberga s.r.o.) – 2021-2023
CZ.01.1.02/0.0/0.0/20_321/0025211 – Research and development of new generation of anticorrosive pigments multiplying the protection of metal surfaces with emphasis on their environmental and rational economic efficiency (cooperation with Rokospol, a.s.) – 2021-2023
CZ.01.1.02/0.0/0.0/17_107/0012417 – MIOMOVE (cooperation with HD Geo s.r.o.) – 2017-2020
CZ.01.1.02/0.0/0.0/15_019/0004549 – Non-flammable systems according to EN45545 for the production of composites (cooperation 5M s.r.o.) – 2015-2020
CZ.01.1.02/0.0/0.0/15_019/0005090 – Pinhole for presbyopia correction (cooperation with GEMINI a.s.) – 2015-2019
Projects Funded by the Czech Science Foundation
GA24-11534S – Conductive (bio)polymer composites with covalently anchored polypyrrole for biomedical applications – 2024-2026
Mgr. Jan Vícha, Ph.D.
GA24-10384S – Polymer memristors with neurosynaptic properties 2024-2026
prof. Ing. Jarmila Vilčáková, Ph.D.
GA23-07425S – Anisotropic and Electro-Conducting Biomaterials – 2023-2025
prof. Ing. Petr Humpolíček, Ph.D.
GA23-07244S – Anisotropic Magnetorheological Elastomers with Controlled Electrical Properties – 2023-2025
prof. Ing. Michal Sedlačík, Ph.D
GA23-07361S – Synthesis of gold nanoparticles for SERS and catalysis guided by selectively oxidized polysaccharides 2023-2025
Ing. Lukáš Münster, Ph.D
GA22-33307S – Development of novel 3D hierarchically structured polysaccharides and proteins porous systems – 2022-2024
Assoc. Prof. Ing. Antonín Minařík, Ph.D.
Projects Funded by the Ministry of Education, Youth and Sports
LO1504 – Centre of Polymer Systems Plus (2015-2020)
doc. Ing. Vladimír Sedlařík, Ph.D.
CZ.02.2.69/0.0/0.0/16_018/0002720 – Development of Research-Oriented Study Programs at UNI (2021)
doc. Ing. Ivo Kuřitka Ph.D.
CZ.02.2.69/0.0/0.0/16_028/0006243 – Development of Capacities for Research and Development at TBU in Zlín
Prof. Ing. Petr Sáha, CSc.
Projects Funded by the Internal Grant Agency
IGA/CPS/2025/001 – Multifunctional composites for biomedical applications
Ing. Filip Latečka
IGA/CPS/2025/002 – Biobased polymer utilization for circular economy
Ing. Abudlkadir Bozarslan
IGA/CPS/2025/003 -Preparation and characterization of foam materials for industrial applications
Ing. Přemysl Fajkus
IGA/CPS/2025/004 – Advanced Engineered Polymer Nanocomposites: From Preparation to Applications
Vanamoorthy Mariappan
IGA/CPS/2025/005 – Description of Thermal Processes and Temperature Evolution of Rubber Materials During Dynamical Cut & Chip loading
Ing. Nikolas Ryzí
IGA/CPS/2025/006 – Carbonized Leather as an Electrorheological Material
Mgr. Lenka Munteanu
IGA/CPS/2025/007 – Organic waste to renewable energy and biopolymers: From sustainable synthesis to implementation
Poulami Chatterjee
Development projects
RP_CPS_2024_28_001 – Composite Biopolymers, 2024-2028
Mgr. Jan Vícha, Ph.D.
RP_CPS_2024_28_002 – Research on environmental technologies of polymer materials for sustainable development, 2024-2028
RNDr. Eva Domincová Bergerová, Ph.D.
RP_CPS_2024_28_003 -Sustainable applications of advanced polymer systems, 2024-2028
Ing. Tomáš Plachý, Ph.D.
RP_CPS_2024_28_005 – Energy and Composite Materials and Technologies, 2024-2028
prof. Ing. Marián Lehocký, Ph.D.
RP_CPS_2024_28_006 – KCompetence development of the Rubber Technology research direction at the Center for Polymer Systems in the area of the impact of tire abrasion particle emissions on the environment, 2024-2028
Ing. Martin Stěnička, Ph.D.
RP_CPS_2024_28_007 – Nanomaterials and advanced technologies for technological and socio-economic challenges of sustainable future, 2024-2028
Ing. Michal Machovský, Ph.D.
Projects Funded by the European Cooperation in Science and Technology
HORIZON-JU-IA – SurfToGreen, 2024-2029, prof. Ing. Petr Humpolíček, Ph.D.
CA22131 – Supramolecular LUminescent Chemosensors for Environmental Security (LUCES), 2023-2027, Ing. Pavel Urbánek, Ph.D.
CA22147 – European metal-organic framework network: combining research and development to promote technological solutions (EU4MOFs), 2023-2027, Mgr. David Škoda, Ph.D.
Global Seed Funds – The design and synthesis of highly active metallosilicate microspheres for olefin metathesis., 2024-2026, Mgr. David Škoda, Ph.D.
HORIZON-CL6-2023-FARM2FORK-01 – Fair, healthy and environmentally-friendly food systems from primary production to consumption, prof. Ing. Vladimír Sedlařík, Ph.D.
HORIZON Europe (SMHYLES) – Safe, sustainable and Modular HYbrid systems for Long-duration Energy storage and grid Services, 2024-2027, Ing. Viera Pechancová, Ph.D.
DRP0200194 „Plan C Moving PLastics and mAchine iNdustry towards Circularity“, Danube Region Programme, prof. Ing. Vladimír Sedlařík, Ph.D.
The NATO Science for Peace and Security Programme (SPS) – Smart Portable Nanosensors for on-site Biomedical and Environmental Analysis (TERRITORY), doc. RNDr. Renáta Oriňáková, DrSc.
H2020-LC-GD-2020 (101036910) Building a low-carbon, climate resilient future: Research and innovation in support of the European Green Deal, 2021-2025, Ing. Viera Pechancová, Ph.D.
TwinVECTOR (101078935) Twinning for Development of World-Class Next Generation Batteries, 2022-2025, Ing. Viera Pechancová, Ph.D.
CA20137 – Project title: Human Resources Strategy for Researchers to Enhance Employability and Institutional Competitiveness (REFRESH-IN) (VOICES) ( 2021-2025), doc. Nabanita Saha, M.Sc., Ph.D.
HORIZON-SOLiD (101069505) Sustainable manufacturing and optimized materials and interfaces for lithium metal batteries with digital quality control, 2022-2026, Ing. Viera Pechancová, Ph.D.
Visegrad Grant No. 22310096 Biodegradable metal development and surface functionalization V4 network, 2023-2024, Kadir Özaltin, Ph.D.
NPRP13S-0127-200177 GreenHouses for Qatari Climate: Energy Saving Smart and Sustainable Phase Change Materials (Green3SPCM), 2022-2024, Ing. Miroslav Mrlík, Ph.D.
CA18236 – Intrepreneurial Universities emerging perspectives enrich regional social innovation ecosystems (EU-RISE). (2019-2024), doc. Nabanita Saha, M.Sc., Ph.D.
Completed projects
COST Action CA15216 PBiosynthesis of Bacterial Cellulose using Inexpensive Nutrient Medium And their Characterizations (BBC-INMAC) 2016 – 2021